**AIM:**

To determine the admittance matrices for the given power system network.

**SOFTWARE REQUIRED:**

MATLAB

**THEORY:**

Bus admittance is often used in power system studies. In most of the power system studies

it is required to form y- bus matrix of the system by considering certain power system parameters

depending upon the type of analysis.

Y-bus may be formed by inspection method only if there is no mutual coupling between the

lines. Every transmission line should be represented by

p- equivalent. Shunt impedances are

added to diagonal element corresponding to the buses at which these are connected. The off

diagonal elements are unaffected. The equivalent circuit of Tap changing transformers is included

while forming Y-bus matrix.

**FORMATION OF Y-BUS MATRIX:**

Generalised Y-bus = yii ……….. yid

ydi ……… ydd

where, Yii = Self admittance

Ydi = Transfer admittance

**PROCEDURE:**

1. Enter the command window of the MATLAB.

2. Create a new M – file by selecting File - New – M – File

3. Type and save the program in the editor window.

4. Execute the program by either pressing Tools – Run.

5. View the results.

**EXERCISE:**

(i) Determine the Y bus matrix and Z bus matrix for the power system network shown in fig.

(ii) Check the results obtained in using MATLAB.

**PROGRAM:**

z = [0 1 0 1.0

0 2 0 0.8

1 2 0 0.4

1 3 0 0.2

2 3 0 0.2

3 4 0 0.08];

Y = ybus(z)

**RESULT:**

Thus the the admittance matrices for the given power system network determined.

## 2 comments

Write commentswhere the hell is the program????????????????????????????????????????

Replyybus is a function??

ReplyIf it is a function,please tell how to import that function to my program

EmoticonEmoticon