EE1352 Power System Analysis Syllabus

EE 1352 POWER SYSTEM ANALYSIS 3 1 0 100

AIM

To become familiar with different aspects of modeling of components and system and different methods of analysis of power system planning and operation.

OBJECTIVES

i. To model steady-state operation of large-scale power systems and o solve the power flow problems using efficient numerical methods suitable for computer simulation.

ii. To model and analyse power systems under
abnormal (fault) conditions.

iii. To model and analyse the dynamics of power system for small-signal and large signal disturbances and o design the systems for enhancing stability.

1. THE POWER SYSTEM – AN OVERVIEW AND MODELLING: (9)

Modern Power System - Basic Components of a power system - Per Phase Analysis Generator model - Transformer model - line model. The per unit system -Change of base.

2. POWER FLOW ANALYSIS: (9)

Introduction - Bus Classification - Bus admittance matrix - Solution of non-linear Algebraic equations - Gauss seidal method - Newon raphson method - Fast decoupled method - Flow charts and comparison of the three methods.

3. FAULT ANALYSIS-BALANCED FAULT (9)

Introduction – Balanced three phase fault – short circuit capacity – systematic fault analysis using bus impedance matrix – algorithm for formation of he bus impedance matrix.

4. FAULT ANALYSIS – SYMMETRICAL COMPONENTS AND UNBALANCED FAULT: (9)

Introduction – Fundamentals of symmetrical components – sequence impedances – sequence networks – single line to ground fault – line fault - Double line to ground fault – Unbalanced fault analysis using bus impedance matrix.

5. POWER SYSTEM STABILITY (9)

Basic concepts and definitions – Rotor angle stability – Voltage stability – Mid Term and Long Term stability – Classification of stability – An elementary view of transient stability – Equal area criterion – Reponses to a short circuit fault- factors influencing transient stability – Numerical integration methods – Euler method – modified Euler method – Runge – Kutta methods.

L = 45, T= 15 Total = 60

TEXT BOOKS:

1. Hadi Saadat “ Power system analysis”, Tata McGraw Hill Publishing Company, New Delhi, 2002 (Unit I, II, III, IV)
2. P.Kundur, “Power System Stability and Control”, Tata McGraw Hill Publishing Company, New Delhi, 1994 (Unit V)


REFERENCE BOOKS:

1. I.J.Nagrath and D.P.Kothari, ‘Modern Power System Analysis’, Tata McGraw-Hill publishing company, New Delhi, 1990.
2. M.A. Pai, ‘Computer Techniques in power system Analysis’, Tata McGraw – Hill publishing company, New Delhi, 2003.
Previous
Next Post »

If you still didn't find what you're looking for, you can search this website below: